PB1924

$ 6,780.00

PB1924 Sand Blasting Machine – ProBlast

$ 6,780.00 plus GST

Auto Recycling Pressure Pot Sandblasting System

The PB1924 Sand Blasting system is a low prices, high quality, and performance sand blasting system designed economically for tight budgets or tight spaces. It comes with the renowned Rayzist under cabinet commercial grade auto recycling pressure pot sand blasting system that performs at the top of its class. The pressure pot system is located under the cabinet so the refill process is sealed ensuring a quick and clean recharging of abrasive. The powerful 135cfn standalone dust collector efficiently separates and traps dust and worn abrasive. The PB1924 has a 60cm x 60cm work area making it smaller than the 2034 but still with plenty of space for most trophy production studios.

SKU: PB 1924 Category:

Pressure Pot
This 50 lb, ASME-certified pressure vessel houses the abrasive. It automatically filters out debris to prevent clogging. Our exclusive 45 degree angle design allows for a more consistent sand flow.

Stand-alone Dust Collector
The stand-alone dust collector is a powerful 135 CFM unit that efficiently separates and traps dust and worn abrasive.

Ergonomic Cabinet Design
The cabinet design follows the contours of your natural position while sand carving, which allows you to work comfortably and more productively.

Seam-welded/Powder-coated
The system is built to last for years, with total seam-welded, 14 gauge steel construction and a epoxy powder-coated finish. The epoxy powder-coated finish resists rust as well as chips, scratches and wears better than other types of finishes.

Gloveless Sleeves
The large glove less sleeves are made of a lightweight polyurethane, for easy mobility and handling of your products while sand carving.

Padded Arm Rests
The padded arm rests prevent stress to your forearms and provide added comfort while sandcarving.

Halogen Lighting Tab
The single recessed halogen lighting provides the brightest lit sand carving workspace on the market. The halogen light also ensures longer life and clean white light during operation.

Oversized Viewing Window
The oversized laminated safety glass provides superior visibility while sand carving. The oversized viewing window can easily be replaced.

Full Size Single Door Entry
The full size single door entry is generous in size and opens on the right side of the cabinet. A large entry area minimizes the potential for bumping or nicking your sandcarved products.

Wheels
Locking wheels give you the flexibility to move your system when required.

Foot Switch Valve
This foot switch valve provides longer performance and is very low maintenance in comparison to the former foot switch valve. It also optimizes air and sand flow to your hoses.

Heavy Duty Blasting Hose
The 10 ft. heavy duty hose is flexible and provides adequate sand flow and longer blasting usage.

Right and Left Hose Holes
The blasting hose can be used from the right or left side, so the system is as convenient for left-handed sandcarvers as it is for right-handed sandcarvers.

Carbide Nozzle
The durable 3/32-inch carbide nozzle is versatile and easy to use for any sand carving project. It comes with an adapter and O-ring.

Pressure Regulator/Water Separator
This unit regulates the amount of air pressure and sand flow (PSI) being sent to your blasting hose/nozzle and efficiently separates the water content. We have combined the two functions into one unit to minimize space. Standard features include an auto-relieving moisture drain to remove water drops and oil from compressed air, a push-down locking adjustment knob to change pressure settings, pressure gauge, liquid level indicator and manual relieving valve.

Exclusive Air Curtain
The Exclusive “Max Flow” Air Curtain directs air across your viewing window to remove dust and ensure maximum visibility while sand carving. This process is made possible by a vent above the viewing window. It also, helps prevent dust and overspray to your viewing window.

Warranty

  • Lifetime warranty on cabinet construction
  • 1-year warranty on the motor
  • 90-day warranty on water separator/regulator
  • 90-day warranty on foot pedal, foot switch valve and heavy duty blasting hose

Inside Work Space: 48cm D x 60cmW x 60cm H.
Outside Dimensions: 58cm D x 65cmW x 168cm H.
Shipping Weight: 150 kilos
Power: 220 volt, 50 hz

Auto re-feed Pressure Pot – No Mess
Side Door Access
Foot switch control for ease of use
Heavy Duty Dust Extractor

Lifetime warranty on Cabinet construction

Minimal foot print

Download 1924 manual here

Download Brochure here

Why does my footswitch have air blowing out of it when I am not stepping on it?

The problem lies in the Foot Pedal Actuator; here are three things you can check:

  1. It could be the (valve in-side the foot pedal housing) that is causing the problem. This occurs when the actuator has become loose and is misaligned allowing the top portion of the pedal’s tab to depress the actuator shaft (button) causing the valve to be a portion of the way depressed (open) allowing air the continue to flow through the pedal.
  2. It may also be that the actuator did not completely open (spring back) after you last stepped off the foot pedal.
  3. There could also be some dust / debris keeping the valve from completely opening (once your foot is off the pedal).
    Simple Fix:

    • Realign foot pedal actuator
    • Clean / lubricate existing actuator with WD40 to remove any dust or derbies from actuator shaft, or within the actuator, blow away any dust from the actuator shaft (button), possibly lubricate shaft, or replace the foot pedal and hoses.
    • To access the actuator remove the two screws on the sides of the pedal.
    • Remove BLUE supply hose and RED exhaust hose for internal lubrication and cleaning.
    • Replace the foot pedal and hoses your cost will be $115.00 (price includes a new modified actuator), unfortunately your style may have been discontinued which will require an up-grade.

I can’t get the air to stop coming out my hose. The foot pedal has no control. I have taken apart my entire assembly at the bottom of the pot, replaced the white block along with the rubber diaphragm.

This could only be caused by two possible problems:

1. Air-supply. The Pressure Pot requires at least 80psi supplied to the pot for the diaphragm to stop the flow of air and sand through the white valve body (lower media valve). The upper media valve requires a minimum 30psi greater pressure then your blasting pressure (shown on pot’s regulator). The upper media valve receives the unregulated air-supply from the compressor. Confirm your Air Compressor is set at the maximum air-output there should be no air restriction to the pot.
2. Foot Pedal Actuator. There is an actuator located in your foot pedal housing that interrupts the air supply when stepping on the pedal. When the pedal is not being depressed it is “normally open” meaning the air is flowing through it. Once you step on the pedal it allows the built up pressure in the lower media valve to force the diaphragm open and the sand and air to flow through the lower media valve and the blasting hose. If your sand and air is not stopping, possibly the foot pedal actuator is stuck closed or pressed in and will not spring back out. Open the foot pedal housing and confirm the actuator tab springs in and out when pressing the tab.