LetraliteKit_Laser

SK2

$ 1,060.00 plus GST

Mask Making Start Up Kit

A best seller, this kit comes with the popular Letralite

Complete Mask Making Kit

If you have a sand blasting machine this is all you need to get started with photo mask sand blasting. This kit comes with the popular Letralite™ UV Exposure Lamp (35cm x 25cm image area) and all of the supplies needed to get started making your own photoresist stencils

Kit Includes:

  • Letralite™ Exposure Unit (35cm x 25cm image area) – Unit can also be purchased separately
  • Hand Sprayer w/ Faucet Adapter
  • Washout Board
  • 5 sheets 8.5” x 14” 3 mil SR3000™ Photoresist Film
  • 5 sheets 8.5” x 14” 4 mil SR3000™ Photoresist Film
  • 5 sheets 8.5” x 14” 5 mil SR3000™ Photoresist Film
  • 15 Cover Paper Sheets
  • Wire Wheel Brush
  • Blasting Tape
  • Plastic Burnisher
  • 5 Vellum Sheets
  • 25 Laser Film Sheets
  • 10 InkJet Film Sheets
  • Imaged Vellum
  • Imaged Laser Film
  • Product Instruction Booklet
  • Magic Dark™ Toner Repair Kit
  • 220v plug Adapter

How to Use your Starter Kit

Kit Specifications

  • Letralite™ Exposure Unit (35cm x 25cm image area)
    • Letralite Exposure Unit This UV light source provides you the ability to expose your photoresist material. UV Light source, 110/220 dual voltage.
  • Hand Sprayer w/ Faucet Adapter
    • this hand-held spray unit easily connects to any standard faucet. Designed specifically for washing out exposed photoresist film, this hand sprayer delivers pressure of 45-55 psi and produces a 4-inch-wide fan of water for an even washout
  • Washout Board
    • a 23cm x 40cm (9″x16″) white, magnetic board used for washing out exposed photoresist
  • 5 sheets 8.5” x 14” 3 mil SR3000™ Photoresist Film
  • 5 sheets 8.5” x 14” 4 mil* SR3000™ Photoresist Film
  • 5 sheets 8.5” x 14” 5 mil SR3000™ Photoresist Film
    • Sample packs of SR3000 resist to get you started. *Please note the 4mil is not available for ongoing sale.
  • 15 Cover Paper Sheets
    • a treated non-stick paper material that protects processed photomask from gathering debris or dust particles prior to sandcarving. Cover paper is applied by placing the shiny side of the paper against a photomask that has been washed out and dried. The photomask can then be stored at room temperature until you are ready to use it.
  • Wire Wheel Brush
    • a hand-held brush tool used to release air trapped between the photomask membrane and the substrate surface.
  • Blasting Tape
    • Easy tear and easy to remove gaff tape for taping up. Tears easily for fast production
  • Plastic Burnisher
    • a hand-held, plastic tool used to bind the photomask to the substrate surface and helps the release of the the clear carrier sheet from photomask.
  • 5 Vellum Sheets
    • Laser printer print media – standard quality print
  • 25 Laser Film Sheets
    • Laser printer print media – high quality print
  • 10 InkJet Film Sheets
    • Ink Jet printer print media – very high quality print
  • Imaged Vellum
    • Sample artwork sheet – handy to test your printer against
  • Imaged Laser Film
    • Sample artwork sheet – handy to test your printer against
  • Product Instruction Booklet
    • A guide to using this kit
  • Magic Dark™ Toner Repair Kit
    • Magic Dark can darken your film print up to three times darker making the exposure and washout process faster and sharper
  • 220v plug Adapter
    • Australian power plug adapter. The exposure unit comes with an American power plug

 

Download SK2 Brochure

sk2

How to Make a Photomask

Making and Using Sandcarving Stencils