LaserMask_4_Single_Roll

LMR4-100

$ 158.00 plus GST

Red Laser Mask 200mm wide - 4" x 100 ft

LazerMask

Description/Application:

LazerMask™ is a non-PVC sandcarving film that won’t corrode your laser’s hardware. With LazerMask™ you can utilize the accuracy and precision of a laser engraver to reproduce images into glass, crystal, and stone while retaining the beauty and depth of traditional sandcarving.

Durability:

LazerMask™ has blast resilient properties equal to Rayzist’s SR™ photo resist films.

Productivity:

LazerMask™ eliminates the steps of a traditional photomask. Just apply, laser, and sandcarve; a major benefit for smaller runs. Blast high resolution designs quickly and easily saving time in application, burn time and clean up.

Available:

4”, 6”, 8” & 10” wide x 200’ rolls.

Requirements:

To use LazerMask™ sandcarving film, you need a laser engraver and a sandcarving system similar to our 1924 Standard System or 2034VX Production model. (See our “Sandcarving Systems” sell sheet or visit www.rayzist.com for more information on sandcarving units).

Shelf Life:

Non-Applicable. Store at room temperature. No special handling required.

Material Chosen and Why:

LazerMask™ sandcarving film is a non-PVC sandcarving film offering a fast burn, great detail, durability, with a fast and easy clean up… without the need for sticky, hard to use vinyls or tapes.

LazerMask Brochure

When laser engraving your material with LASERMASK, we recommend that you increase the raster settings (engraving power) between 5% – 10% depending on your material. This will ensure to go through the LASERMASK and your material at the same time. Alternatively you can run your job twice without moving the material if you require deeper result.

The paint can be applied right away. Allow sufficient enough time for it to dry, before carefully and slowly removing the LASERMASK.

LazerMask How to Use Quick Guide