SR3000_Roll_30_3

SR3-3-30

$ 528.90 plus GST

SR3000 3mil Self-Stick Resist - 35cm wide roll - 30ft x 14"

Industry leading SR3000™ is a high-resolution photoresist with an inherent self-sticking quality enabling etchers to achieve the finest detail and deepest etch in the sand blasting industry. SR3000™ will turn any black and white design into a sand carving stencil. It provides an ideal system for creating fine quality engraving on endless varieties of glass, wood, stone, ceramic, granite, marble, and soft metals. From exposing to blasting, carvers are able to get it done faster and more efficiently than ever before.

The SR3000 Advantage

  • Faster wash out
  • Excellent adhesive quality
  • Easy to use and consistently reliable
  • No residue on peel off
  • Very fine detail masks
  • The most versatile resist on the market – use it for any project

Resolution and Depth
3mil SR3000 – Line width possible: 0.35mm | Etching Depth: to 2mm
6mil SR3000 – Line width possible: 0.50mm | Etching Depth: to 7mm

Size
This 30ft roll size in centimetres is: 915cm long x 35cm wide.
Total square cm equals: 32,025 sq.cm
We always roll 1 extra wrap of resist at no charge for you.

We only sell resist by the roll because sheets will cause you lots of trim wastage. Roll it out and cut of what you want for less wastage and more profit per pack.

Description:
User friendly SR3000™ is a high-resolution photoresist with an inherent self-sticking quality enabling etchers to achieve the finest detail and deepest etch in the sand blasting industry. SR3000™ will turn any black and white design into a sandcarving stencil. It provides an ideal system for creating fine quality engraving on endless varieties of glass, wood, stone, ceramic, granite, marble, and soft metals. From exposing to blasting, carvers are able to get it done faster and more efficiently than ever before.

Requirements:
SR3000 can be processed easily with a UV light source, film print and pressurized washout unit, such as a ProBlast Hand Washer or automatic washout unit. A Plastic Burnisher is necessary to bind the processed photomask to the substrate surface and remove the photomask’s clear carrier. The ProBlast Wire Wheel Brush is also strongly recommended; this hand-held tool releases air trapped between the substrate and the photomask.

Room Lighting:
You do not need a darkroom or yellow lighting to use SR3000. The film can be safely handled in white fluorescent lighting for approximately ten minutes. Avoid any room or area that has direct or indirect UV light such open windows or doors. Sunlight will expose the film in a matter of seconds.

Mils:
SR3000™ comes in 3 & 5 mil thicknesses.
3 mil is recommended for fine detailed artwork and halftoned photos.
5 mil is recommended for bold artwork, moderate to deep stage carving.

Shelf Life:
Conservatively, 12 months at room temperature.

Development:
Standard washout times begin at 45-60 seconds, depending on the mil.

Exposure Time:
20 seconds

Durability:
SR3000™ has unmatched blast resilient properties superior to any photoresist in the industry. Blast high resolution designs without the worry of pin hole blast through.

High Productivity:
SR3000™ is fast to use and ideal for small or large run jobs.

Material Chosen and Why:
SR3000™ photoresist film satisfies all needs for a self-stick film without the problems “self-adhesive” brands can bring. SR3000™ renders unmatched detail for half-tone imaging and ultra-high resolution images. SR3000™ saves time and money by enabling you to produce a superior product with less hassle.