CNC AutoB: Add a Manual Head to your system

Jun 2024 Author: Geoff Warleigh
chevron-left
Back
CNC AutoB: Add a Manual Head to your system

You can add a manual blasting head to your CNC AutoBlaster system for wehen you have non-flat surfaces such as a book or slightly curved surface. You have to change the head over each time you want to use it manually.  The SM-Pro on it's own has a manual blasting head which is different to the CNC head.

Order the Kit Here

In order to make the change you:

  1. Remove the CNC vacuum and blasting hoses from the SM-Pro and replace them with the manual head hoses.
  2. Remove the electrical power connections from the CNC control box at the back of the machine. And fit the blast switch to the blasting head switch.
  3. Connect the SM Pro to 15amp power point.